High Power Lead Acid Battery

The Cyclic Monobloc, perfect high power lead acid battery replacement for electric scooters if you want that extra go! These sealed valve regulated lead acid rechargeable batteries are maintenance free. Safety, outstanding battery life and value. These batteries are designed for universal float service and cyclic applications. Battery life will depend on frequency and depth of discharge and temperature of operation. UL Recognised Component under MH 28022

Valve Regulated Construction (Sealed)
The battery is of the AGM (Absorbed Glass Mat) valve regulated (sealed) VRLA lead acid secondary rechargeable type. The electrolyte is suspended in a specially formulated non woven glass mat separator. All the electrolyte is absorbed in this manner and provides a safe non-spillable battery.

Gas Recombination System.
The gasses generated in the normal charge/discharge use of a rechargeable battery are internally recombined during normal operating parameters. In fact, in normal operational use, more than 99% of the gases generated are recombined.

Maintenance
The battery has been designed and built such that no addition of electrolyte is needed for the life of the battery. There is no need to add water or take specific gravity readings.

Battery Life - Float Service & Cyclic
The battery is suitable for float (standby) service with life of 5 to10 years at 20oC. Life in Cyclic applications will depend on the frequency and depth of the Cycles.

Safety Valve.
If excess pressure builds up within the battery, the safety valve automatically opens and re closes, releasing the gas at 1-3 psi. The valve does not allow the ingress of oxygen which is harmful and reduces the life expectation of the VRLA battery.

Temperature Range for Normal Operation.
The  battery has a wide operating temperature range of –20C to +55C. However for maximum life and safety, continuous operation over 40 Deg C is not recommended. In fact this is not recommended for any valve regulated battery.

Grid Design and Paste Formulation.
The battery uses a proprietary Cyclic Virgin pure lead / 1.6% Tin alloy in the positive grid which was developed for the challenges of the Telecom industry. Thus our partners have optimized the grid design and paste formulation to maximize the operating characteristics in both float service and Cyclic operation.

This optimized design provides the following advantages. Excellent recovery from deep discharge or over discharge Low self discharge to ensure maximum storage time when not in use. Excellent cycling capability for an AGM battery (Gel batteries will always cycle better)
Adequate safety margins in tough operating conditions.

Use In any Position.

The battery is designed to use in both Vertical and Horizontal position.

These Batteries have been used in the industrial battery market for nearly 30 years. High quality, long design life, reliable AGM technology lead acid batteries have a proven record. Features include handles for easy lifting, brass insert terminals for higher current capacity and reduced damage during transportation, designed to comply with the new IEC 60896-21/22 – 2004
standard BS 6290 Part 4, UL certified components in an ISO 9001-ISO 14001 manufacturing facility.

Please contact us for prices and size.  AH range from 10AH-250AH : Volt Range from 6Volts-12volts

For our new range of high power lithium packs >click here<

For our new range of deep discharge very high quality Lead Acid Gels >click here<

For our range of High Temp Catalyst Monoblocs